The radiant energy produced under the form of light or heat
can be absorbed and transformed into electric current.
The first two levels transform the light into electric
current and the other three levels take over that heat from
the first two levels.
The heat lost by the cooling process transforms itself into
electric current.
By closing the space between the coil and the
photo/thermo/electric panels, we obtain two atomic systems,
one isolated with N and S electromagnetic polarities forming a
quantic generator.
The quantic generator has three electric circuits: U1,
U, U2. The electrical circuit to start operating is the
circuit U2 composed of the source G, the ballast L, inducing
resistors R1 and R2 and switches K1, K2, K3 and K4.
The source G of continuous electric current feeds the coil
with electric energy. This produces energy as well on its
external surface in the isolated atomic system, as on its
internal surface of the non/isolated atomic system.
The luminous radiant energy and the thermic energy produced
by the isolated atomic systems is absorbed by the
photo-thermo- electric panels that transform it into electric
current.
The circuit U will indicate the presence of a tension T. At
that moment the circuit U2 is closing and the circuit U1 is
opening.
The circuits U1 is equipped with a potentiometer P connected
to clamps A - B of the circuit U, so as to utilize only part
of its tension to feed the coil with electric energy.
The value of the tension depends on the position of the
cursor C, which grows when the cursor moves towards A and
decreases when the cursor moves towards B.
can be absorbed and transformed into electric current.
The first two levels transform the light into electric
current and the other three levels take over that heat from
the first two levels.
The heat lost by the cooling process transforms itself into
electric current.
By closing the space between the coil and the
photo/thermo/electric panels, we obtain two atomic systems,
one isolated with N and S electromagnetic polarities forming a
quantic generator.
The quantic generator has three electric circuits: U1,
U, U2. The electrical circuit to start operating is the
circuit U2 composed of the source G, the ballast L, inducing
resistors R1 and R2 and switches K1, K2, K3 and K4.
The source G of continuous electric current feeds the coil
with electric energy. This produces energy as well on its
external surface in the isolated atomic system, as on its
internal surface of the non/isolated atomic system.
The luminous radiant energy and the thermic energy produced
by the isolated atomic systems is absorbed by the
photo-thermo- electric panels that transform it into electric
current.
The circuit U will indicate the presence of a tension T. At
that moment the circuit U2 is closing and the circuit U1 is
opening.
The circuits U1 is equipped with a potentiometer P connected
to clamps A - B of the circuit U, so as to utilize only part
of its tension to feed the coil with electric energy.
The value of the tension depends on the position of the
cursor C, which grows when the cursor moves towards A and
decreases when the cursor moves towards B.
Niciun comentariu:
Trimiteți un comentariu